B/W Reverse - Xerox WorkCentre C226 User Manual

Copier Operation

B/W reverse

Original
2-50
Black and white are reversed in the copy to create a negative image. (This function
can only be used for black and white copying.)
B/W reverse copy
1. Touch the key to switch to the second SPECIAL MODES screen.
Dual Page
Copy
Transparency
Inserts
2. Touch the [B/W REVERSE] key in the second SPECIAL MODES screen.
B/W
Image Edit
Reverse
3. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
About the steps that follow
If a DADF is being used, see pages 2-13 through 2-19. If the document glass is being
used, see pages 2-21 through 2-24.
To cancel the B/W reverse function, touch the [B/W REVERSE] key in the SPECIAL
MODES screen (the screen of step 2).
NOTE:
Originals with large black areas (which use a large amount of
toner) can be printed with black/white reverse to reduce toner
consumption.
The [B/W REVERSE] key will be highlighted to indicate
that the function is selected. In addition, the B/W reverse
icon ( ) will appear in the upper left-hand corner of the
screen.
Xerox WorkCentre C226 User Guide