Xerox WorkCentre C226 User Manual page 378

Fax Unit
MEMORY
0001 11245
XEROX Document
Group 1
3321
3333 4444
Department
Reports
Manager
11111111
Public Box*
This machine
F-code polling memory
box
Sub-address SEP
Passcode PWD
5-50
be programmed to control access to the box. (A sub-address must be programmed,
however, a passcode can be omitted.)
7732123
Product Planning
Dept.
1115
010
Section
Manager
123456
* The Public Box is used for normal serial polling (see"Using Polling Memory" on
page 5-38).
When communication occurs involving a memory box, the communication will only
take place if the sub-address and passcode that the other machine sends match the
sub-address and passcode programmed in your machine for that box. Therefore, to
allow communication, you must inform the other party of the sub-address and pass-
code of the memory box. Likewise, to send a document to a memory box in another
machine or use polling to retrieve a document from that memory box, you must know
the sub-address and passcode of that memory box. (Box names are used only to man-
age boxes in the machine; you do not need to inform the other party of a box name the
other party only needs to know the sub-address and passcode.)
This machine uses the term "sub-address" for the location of the memory box and the
term "passcode" for the authorization number of the memory box; however, the prod-
ucts of other manufacturers may use different terms. When asking the other party for a
sub-address and passcode, you may find it useful to refer to the 3-character alphabet-
ical terminology used by the ITU-T.
7732123
7732123
Product
Product Planning
Planning
Dept.
Dept.
1115
ITU-T
F-code Confidential box
SUB
SID
Xerox WorkCentre C226 User Guide
Sub-address (location in memory)
Select any number up to 20 digits.
Box name (used to manage
boxes in your machine)
Select a name of up to 18
characters.
Passcode (key)
Select any number up to 20 digits.
(Not required)
1115
F-code Relay Broadcast
Function
SUB
SID