Misfeed In The Stand/1-Tray Unit - Xerox WorkCentre C226 User Manual

General Information

Misfeed in the stand/1-Tray Unit

NOTE:
NOTE:
NOTE:
1-52
Paper misfed from a paper tray may be extending out of the tray into the right side
cover area. In this case if the tray is drawn out of the machine, the paper may become
torn and difficult to remove. To prevent this from happening, always open the right side
cover first and remove the misfed paper if it is extending into that area.
1. Open the upper and lower side covers.
If paper is loaded in the Bypass Tray, temporarily remove the paper and close the
Bypass Tray before opening the side cover.
2. Remove the misfed paper.
The misfeed may have occurred inside the machine. Check carefully and remove it.
3. If misfed paper is not found in step 2, pull out Paper Tray 1 and remove the misfed
paper.
4. Gently push the paper tray into the machine.
Push the tray firmly all the way into the machine.
Be careful not to tear the misfed paper during removal.
Xerox WorkCentre C226 User Guide
Push the lever upward and
gently open the cover.
Be careful not to tear the
misfed paper during
removal.