Xerox WorkCentre C226 User Manual page 176

Copier Operation
2-72
2. Designate the type of originals to be copied: 1-sided or 2-sided.
Pamphlet Copy
Original
1-Sided
Select the [2-SIDED] key when you are using the DADF to scan a two-sided
original.
3. Select the binding position (left binding or right binding) and touch the [OK] key
(inside [OK] key) on the PAMPHLET COPY setting screen.
Cancel OK
Left Right
ed
Binding Binding
4. Touch the [OK] key on the IMAGE EDIT menu screen. Return to the SPECIAL
MODES screen.
5. Touch the [OK] key on the SPECIAL MODES screen. Return to the main screen of
copy mode.
6. Place the original in the DADF tray or on the document glass. (pages 2-4 to 2-10)
7. Ensure that the desired paper size has been automatically selected based on the
original size.
To select another size paper, touch the [More...] key in the Copy Ratio display,
then select the desired size and touch the [AUTO IMAGE] key. The appropriate
copy ratio will be selected automatically based on the original size and the paper
size. (See step 2 on page 2-29.)
8. Make all other desired settings such as exposure or the number of copies, and
press the [START] key.
When using the DADF:
Copying will start after all originals have been scanned. (The next step is not
needed.)
When using the document glass:
Replace the original with the next original and press the [START] key. Repeat this
operation until all originals have been scanned. Then touch the [READ-END] key.
When the pamphlet copy function is set, the two-sided copying mode will be automati-
cally selected.
To cancel the pamphlet copy function, touch the [CANCEL] key on the pamphlet copy
setting screen (step 2).
Cancel OK
Left Right
2-Sided
Binding Binding
Return to the IMAGE EDIT menu screen.
Xerox WorkCentre C226 User Guide