Setting Up A Timer Transmission - Xerox WorkCentre C226 User Manual

Setting Up a Timer Transmission

Xerox WorkCentre C226 User Guide
Automatic Transmission at a Specified Time (Timer Transmission)
1. In fax mode, touch the [SPECIAL MODES] key.
Auto Reception
Sub Ad
Special Modes Address
2. Touch the [TIMER] key.
Special Modes
Timer
3. Select the day of the week. (Touch the
is selected.)
imer
Day Of The Week
4. Select the time in 24-hour format.
Cancel
Time
00 00
HH.
The current time appears at the top of the screen. If the time is not correct, press
the [CLEAR ALL] key to stop operation and adjust the date and time. (Refer to
page 1-39.)
5. Touch the outer [OK] key.
Ok
Ok
Cancel
00
mm.
Add
If the address directory screen appears, touch the [CON-
Dire
DITION SETTINGS] key to display the condition settings
screen.
The timer transmission screen appears.
key or the
The initial setting is "---" (no selection). If you select this
setting, the transmission will be performed as soon as
the specified time arrives.
Select the time. (Touch the
desired time appears.)
Example:
11:00 P.M. 23:00
mm.
You will return to the screen of step 1 and a timer trans-
mission icon will appear next to the [EXPOSURE] key.
To cancel timer, touch the [CANCEL] key.
key until the desired day
key or the key until the
5-33