Adding A Folder As An Address Book Entry Using The Address Book Editor; Scanning To A Folder On A Network Computer - Xerox workcentre wc3655 User Manual

Scanning

Adding a Folder as an Address Book Entry Using the Address Book Editor

On your computer, select Start > All Programs > Xerox Office Printing > <Select Value> Address
1.
Book Editor.
2. In the left navigation pane, under Address Book, click Server.
3. For Name, enter the name of the shared file on your computer.
4. For Server Type, select Computer (SMB).
Click Computer Settings Wizard.
5.
6. In the Computer Folder Settings window, click Browse.
7. Navigate to a shared folder on your computer.
Click Next.
8.
9. When prompted to continue, click Yes.
10. In the Set Up Scanner Account window, click Next.
11. In the Confirmation window, click Finish.
12. In the Server Address window, click OK.
13. To save changes, when exiting, click Yes.

Scanning to a Folder on a Network Computer

1. Load the original on the document glass or in the duplex automatic document feeder.
2. At the printer control panel, press the Services Home button.
On the printer control panel, touch Scan to.
3.
4. Touch Network.
5. Touch the address book entry.
Touch OK.
6.
7. To change scan settings, touch the appropriate buttons. For details, see
on page 103.
8. To change the file name, touch File Name, type the name, then touch OK.
9. To select a file format:
a. Touch the Filing Options tab, then touch File Format.
Touch an option, then touch OK.
b.
10. To begin the scan, press Start. The printer scans your image to the folder you specified.
98 Xerox® WorkCentre® 3655 Multifunction Printer
User Guide
Adjusting Scanning Settings