F-Code Relay Broadcast Transmission - Xerox WorkCentre C226 User Manual

Xerox color laser printer user guide
Hide thumbs Also See for WorkCentre C226:
Table of Contents

Advertisement

F-Code Relay Broadcast Transmission

Relay request machine (sends document)
1) Document is sent from
machine requesting
relay transmission
Receiving machine A
Xerox WorkCentre C226 User Guide
The F-Code relay broadcast function allows the machine to act as a relay machine for
a broadcast transmission. The end receiving machines are stored in the machine's F-
Code relay memory box, and when the machine receives a relay request from another
F-Code machine, it will relay the fax to all of the stored end receiving machines.
The relay machine and the originating machine that requests the relay transmission
must both support F-codes; however, the end receiving machines programmed in the
F-code relay broadcast memory box do not need to support F-codes.
Sub-address
Passcode
Receiving machine B
The machine that originally sends the document is called the relay request machine,
and the machine that has a memory box containing the end receiving machines and
which relays the received document to those machines is called the relay machine.
The relay machine also prints the document sent by the relay request machine.
For example, corporate headquarters in Seattle wants to send the same document to
branch offices in San Francisco, Oakland, Berkeley, and San Jose. If the San Fran-
cisco office creates a relay broadcast memory box and programs the Oakland, Berke-
ley, and San Jose offices as end receiving destinations, the overall phone charges will
be lower than if the Seattle office uses the normal broadcast transmission function
(page 5-30). This function can also be combined with a timer setting (page 5-33) to
take advantage of off-peak rates, allowing a further reduction in phone charges.
F-Code Relay Broadcast Transmission
Relay machine (your machine)
2) Check sub-address
and passcode
x
3) Document data is
read into relay broadcast
S.F.
memory box
(reception is permitted).
4) Document is automatically transmitted
to end receiving machines programmed
in the relay broadcast memory box.
Receiving machine C
5-59

Advertisement

Table of Contents
loading

Table of Contents