Job Program Memory; Storing A Job Program - Xerox WorkCentre C226 User Manual

Job Program Memory

Storing a job program

Xerox WorkCentre C226 User Guide
Frequently used job programs can be stored in each of ten storage registers. This is
convenient for quick job recall without losing time manually reprogramming each
aspect of a job. Job programs can be recalled with ease, and the programs are
retained even when the power is turned off. By programming frequently used copy set-
tings, you can eliminate the bother of selecting the settings each time you use them for
a copy job.
• Selection for functions stored as part of a job program, will not be recalled as part
of the program if the function has been disabled or changed by a key operator pro-
gram.
• To exit the job memory mode, press the [CLEAR ALL] key on the operation panel
or touch the [EXIT] key on the touch panel.
1. Press the [#/P] key.
2. Touch the [STORE/DELETE] key to obtain the storage register screen.
M Number.
Recall Store/Delete
3. Touch a number key from 1 to 10 on the storage register screen.
Programs
ess Program Number.
Recall
Highlighted storage register numbers are registers which
already have programs stored.
Store/
Job Program Memory
2-73