Single Colour - Xerox WorkCentre C226 User Manual

Copier Operation
MULTI-PAGE
ENLARGEMENT
PAMPHLET
COPY

Single colour

2-60
Enlarges an original image to a size larger than A3 (11" x 17") and prints divided
images onto multiple sheets of copy paper for assembly into large composite copy
(page 2-68).
The pamphlet copy function is used to arrange copies in proper order for eventual cen-
tre-stapling and folding into a booklet. Two original pages are copied onto each side of
copy paper. Four pages are, therefore, copied onto one sheet (page 2-71).
(A Duplex Module/2-Tray Unit and a Duplex Bypass/Inverter Unit are required for this
function.)
Produces copies with a selected single colour.
1. Touch the [SINGLE COLOUR] key on the IMAGE EDIT screen.
Image Edit
Single Colour
A3
Full-Bleed
2. Select the desired colour.
Image Edit
-1
Single Colour
1.Red 2.Green
4.Yellow 5.Magenta
When one of the keys is touched, the single colour icon (
upper left of the screen to indicate that the single colour function is turned on. (The
number that appears with the icon indicates the selected colour, and is the number
on the key of the selected colour.)
3. Touch the [OK] key (inside [OK] key) on the SINGLE COLOUR setting screen.
Return to the IMAGE EDIT menu screen.
4. Touch the [OK] key on the IMAGE EDIT menu screen.
Return to the SPECIAL MODES screen.
5. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
The SINGLE COLOUR setting screen will appear.
M
I
Mult
Enla
OK
Cancel OK
3.Blue
6.Cyan
1 ) will appear at the
-
Xerox WorkCentre C226 User Guide