Editing And Deleting One-Touch Keys - Xerox WorkCentre C226 User Manual

Fax Unit
NOTES:

Editing and Deleting One-Touch Keys

5-72
International correspondence mode
Selections are NONE, MODE 1, MODE 2, and MODE 3.
• When sending a fax to a foreign country, telephone line conditions can sometimes
distort the fax or interrupt the transmission. Selecting the right international
correspondence mode can help alleviate these problems.
• If errors frequently occur when sending a fax to a foreign country, try each of
modes 1 to 3 and select the mode that enables the best transmission.
15. When you have finished programming the one-touch key, touch the [EXIT] key. If
you wish to program another one-touch key, touch the [NEXT] key.
Next Exit
Initial S
. 0666211221/3456/987654
Mode 33.6 kbps/NONE
If you wish to delete a one-touch key or change the fax number, name, or other infor-
mation programmed in a one-touch key, follow steps 1 through 3 beginning on page 5-
67 and then perform the following procedure.
1. Touch the [AMEND/DELETE] key.
Amend/Delete
2. Touch the one-touch key that you wish to edit or delete.
Direct Address / Amend/Delete
Select Address To Amend/Delete.
Xerox Corporation Corpo.Tps
Xerox Group D
E F
G H
Frequent Use ABCD EFGHI JKLMN
• To edit a one-touch key, follow steps 3 and 4.
• To delete a one-touch key, follow steps 5 and 6.
• When you have finished editing or deleting, touch the [EXIT] key.
Touching the [EXIT] key returns you to the screen of step
2 on page 5-67.
Touching the [NEXT] key returns you to the screen of
step 1 on page 5-68.
Exit
Program
OPQRST UVWXYZ ABC Group
Xerox WorkCentre C226 User Guide