Setting Envelopes Or Postcards - Xerox WorkCentre C226 User Manual
Xerox color laser printer user guide
Hide thumbs
Also See for WorkCentre C226:
- Quick connect manual (18 pages) ,
- Quick start manual (29 pages) ,
- System administration manual (216 pages)
Table of Contents
Advertisement
General Information
1-26
•
Use only Xerox-recommended transparency film. Insert the film so that the
rounded corner is on the left for horizontal loading, or on the right for vertical
loading.
Horizontal
loading
•
When loading multiple sheets of transparency film in the Bypass Tray, fan the
sheets several times before loading.
Setting envelopes or postcards
When setting envelopes or postcards in the Bypass Tray, set them in the orientation
shown below.
Loading postcards
Insert the postcard with the side to be printed on facing up. The postcard should be
oriented as shown in the diagram.
Loading envelopes
Only the front side of envelopes can be printed. Insert the envelope with the front side
facing up.
Printing onto envelopes or postcards
•
Attempting to print onto both sides of envelopes or postcards may result in mis-
feeds or poor prints.
•
Do not use pre-printed envelopes.
•
Before inserting a postcard or envelope, straighten any curled edges. Curled
edges may cause creases, colour deviations, misfeeds, and poor quality images.
Vertical
loading
Xerox WorkCentre C226 User Guide
Advertisement
Chapters
Table of Contents
Troubleshooting
