Xerox WorkCentre C226 User Manual page 359

NOTES:
Xerox WorkCentre C226 User Guide
3. Touch the [NEXT ADDRESS] key and then dial the fax number of the next
destination or touch an auto-dial key.
se Next Address
Condition
Settings
Sub Address
• If you enter an incorrect number
If you make a mistake while entering a number, press the [C] key and then re-
enter the correct digit(s).
If you have already completed entry of a fax number, you can delete the number
using steps 4 and 5.
• If you select an incorrect auto-dial key
Simply touch the incorrect key one more time to cancel the selection.
• The [NEXT ADDRESS] key only needs to be touched when successively dialing
fax numbers with the numeric keys.
Example:
XXXX NEXT ADDRESS XXXX
Dial
Cannot be omitted.
XXXX NEXT ADDRESS One-touch NEXT ADDRESS One-touch
Dial
Can be omitted.
If desired, you can use the key operator program to set the machine so that the
[NEXT ADDRESS] key must always be touched.
4. Touch the [ADDRESS REVIEW] key to display the list of destinations.
Condition
Settings
Sub Address
Address Review
Repeat this step for each of the remaining destinations.
Dial
Can be omitted.
When the [ADDRESS REVIEW] key is touched, only the
entered and selected destinations are displayed.
Using Broadcast Transmission
5-31