Mirror Image - Xerox WorkCentre C226 User Manual

Mirror image

Xerox WorkCentre C226 User Guide
About the steps that follow
If a DADF is being used, see pages 2-13 through 2-19. If the document glass is being
used, see pages 2-21 through 2-24.
In either case, press the [COLOUR COPY START] key to begin copying.
To cancel the SINGLE COLOUR function, select the SINGLE COLOUR function again
and touch the [CANCEL] key (step 2).
This function is used to print a mirror image of the original. The images will be inverted
in the right to left direction on the copies.
Original
1. Touch the [MIRROR IMAGE] key on the IMAGE EDIT menu screen.
Mirror
our
Image
Multi-Page
eed Enlargement
Return to the SPECIAL MODES screen.
3. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
About the steps that follow
IIf a DADF is being used, see pages 2-13 through 2-19. If the document glass is being
used, see pages 2-21 through 2-24.
To cancel the MIRROR IMAGE function, touch the MIRROR IMAGE again on the
IMAGE EDIT menu screen (step 2).
Copy
The [MIRROR IMAGE] key will be highlighted to indicate
that the function is turned on, and the mirror image icon
( ) will appear in the upper left of the screen.
Phot
Pamp
2.Touch the [OK] key on the IMAGE EDIT menu screen.
Image Edit Menu
2-61