Managing The Machine; Loading Paper; Loading Paper In Paper Tray 1 - Xerox WorkCentre C226 User Manual

Loading Paper

NOTES:

Loading paper in Paper Tray 1

Xerox WorkCentre C226 User Guide

Managing the Machine

The message "ADD PAPER" or "OPEN TRAY AND ADD PAPER" will appear when
paper runs out during operation.
Follow the procedure below to load paper.
• Do not use curled or folded paper. Doing so may cause a misfeed.
• For best results use paper supplied by Xerox. (See pages 1-30, 1-45.)
• When you change the paper type and size in Paper Tray 1, you must change the
paper type and size settings as explained in "Setting the paper type (except the
Bypass Tray)" on page 1-33).
• Do not place heavy objects or press hard on any tray which is pulled out.
1. Pull out Paper Tray 1.
2. Load paper into the tray.
3. Gently push tray 1 into the machine.
Push the tray firmly all the way into the machine.
Gently pull the tray out until it stops.
Load a stack of paper no higher than the indicator line
(about 500 sheets of the recommended paper for colour
(80 g/m2 or 21 lbs.), or approximately 500 sheets of
Xerox standard paper (80 g/m2 or 21 lbs.)).
Loading Paper
1-21