Windows Nt4.0 / 2000 / Xp / Server 2003; Selecting A Color Mode Setting - Xerox WorkCentre C226 User Manual

Printer Operation
NOTE:
3-2
3. Set each item.
For setting items, see the printer driver help. For information on viewing Help, see
page 3-3. An example showing how to set [Color Mode] to [Automatic] printing is
given on page 3-2.
4. Click the [OK] button.

Windows NT4.0 / 2000 / XP / Server 2003

The procedure for adjusting the settings in Windows XP is explained in the following.
1. Select [Printers and Faxes] from the [Start] menu.
2. Right-click the installed printer driver and select [Printing Preferences...].
3. Set each item.
For setting items, see the printer driver help. For information on viewing Help, see
page 3-3. An example showing how to set [Color Mode] to [Automatic] printing is
given on page 3-2.
4. Click the [OK] button.
Settings for the Duplex Module/2-Tray Unit, Saddle Stitch Finisher, 3-Tray Unit, and
other optional peripheral equipment can be accessed by right-clicking the installed
printer driver, selecting [Properties], and then selecting the [Configuration] tab. If you
use this product as a network printer and you have installed the Xerox Print Status
Monitor, the configuration of peripheral devices will be automatically set by clicking
[Auto Configuration]. If you click the [Update Tray Status] button in the [Tray Status]
dialog box of the [Paper] tab, the current tray information (paper size, paper type, and
quantity of paper remaining) will be displayed.

Selecting a Color Mode setting

The following example shows how to set [Color Mode] to [Automatic] printing in the
Color tab of the printer driver properties.
1. Follow steps 1 and 2 on page 3-1.
2. Click the [Color] tab.
Xerox WorkCentre C226 User Guide