Xerox WorkCentre C226 User Manual page 74

General Information
1-48
3. If misfed paper is not found in step 2, pull out Paper Tray 1 and remove the misfed
paper.
4. Gently close the paper tray.
5. Gently close the upper side cover.
Misfeed in the Bypass Tray
1. Remove the misfed paper from the Bypass Tray.
2. After removing the misfed paper, open and close the Duplex Bypass/Inverter Unit
to reset.
Be careful not to tear the misfed paper during removal.
Push the tray firmly all the way into the machine.
After closing, confirm that the misfeed message has
been cleared and the normal display appears.
Be careful not to tear the misfed paper during removal.
Grasp the finger hold and gently open the unit.
Xerox WorkCentre C226 User Guide