Xerox WorkCentre C226 User Manual page 335

Message display
1
Memory and
2
reception mode
display
[SPEAKER]
3
[REDIAL]
4
[ADDRESS
5
DIRECTORY]
[SUB ADDRESS]
6
[ADDRESS
7
REVIEW]
[SCANNER/FAX]
8
Xerox WorkCentre C226 User Guide
Condition settings screen
The display is initially set (factory setting) to show the following condition settings
screen as the initial screen.
1
Ready To Send.
14
Auto
13
Exposure
Standard
12 Resolution
Auto
11
Original
10
Messages appear here to indicate the current status of the machine. The icon at left
( ) indicates fax mode.
This shows the amount of fax memory that is free and the currently selected reception
mode.
Touch the [SPEAKER] key to dial and transmit a fax manually.
During dialing it changes into the [PAUSE] key, and after touching the [SUB
ADDRESS] key it changes into the [SPACE] key.
Touch this key to redial the number most recently dialed with the numeric keys or a
one-touch key. After dialing, this key changes into the [NEXT ADDRESS] key.
Touch this key to display the address directory screen. Touch this key when you want
to use an auto-dial number (one-touch dialing or group dialing).
Touch this key to enter a sub-address and passcode when using F-code transmission
(page 5-56).
When performing a broadcast transmission (page 5-30), touch this key to check your
selected destinations. The selected destinations will appear and any unneeded desti-
nations can be deleted.
This key appears when the network scanner option is installed. Touch the key to
switch between the scanner screen and the fax screen. When the fax screen appears,
"FAX" is highlighted. When the scanner screen appears, "SCANNER" is highlighted.
Fax Mode (Condition Settings Screen)
2 3
Speaker
Fax Memory:100%
Auto Reception
Special Modes Address Review
Scanner
9
4
Redial
Address
5
Directory
6
Sub Address
7
8
Fax
5-7