Default Settings; Copies; Orientation; Default Paper Size - Xerox WorkCentre C226 User Manual

Printer Operation

Default settings

NOTE:
3-46
The default settings are used to set specific print conditions for printing in an environ-
ment where the print driver is not used (such as printing from MS-DOS or from a com-
puter that does not have the provided print driver installed).
When some items can be set both in the printer driver and on the operation panel, the
values set in the printer driver override those set on the operation panel. For items that
can be set in the printer driver, perform the settings in the printer driver.
The following settings are available:

Copies

COPIES sets the number of print to make.
Default setting: 1
The number of copies can be set from 1 to 999.

Orientation

ORIENTATION allows portrait orientation or landscape orientation to be selected for
printing.
Default setting: PORTRAIT
PORTRAIT or LANDSCAPE can be set.

Default paper size

The paper size to be used for printing under normal conditions is set.
Printing will be performed on the specified size of paper unless otherwise specified.
Default setting: A4 or 8-1/2X11
A3W, A3, B4, A4, B5, A5, 11X17, 8-1/2X14, 8-1/2X13, 8-1/2X11, 7-1/4X10-1/2, 5-1/
2X8-1/2, 8K or 16K can be set.

Default output tray

The output tray to be used for printing under normal conditions is set. Printed sheets
will be output to the specified tray unless otherwise specified by application software.
Default setting: CENTRE TRAY
The trays that can be selected depend on installation of peripheral devices.
Xerox WorkCentre C226 User Guide