A3 (11" X 17") Full-Bleed - Xerox WorkCentre C226 User Manual

Copier Operation

A3 (11" x 17") Full-bleed

2-66
4. Select whether or not to add borderlines.
Cancel OK
yout
Border Line
5. Touch the [OK] key (inside [OK] key) on the MULTI SHOT setting screen.
Return to the IMAGE EDIT menu screen.
6. Touch the [OK] key on the IMAGE EDIT menu screen.
Return to the SPECIAL MODES screen.
7. Touch the [OK] key on the SPECIAL MODES screen.
Return to the main screen of copy mode.
About the steps that follow
If a DADF is being used, see pages 2-13 through 2-19. If the document glass is being
used, see pages 2-21 through 2-24.
To cancel the multi shot function, touch the [CANCEL] key on the multi shot setting
screen (step 2).
In other copy modes, image loss will occur along the copy edges. When the A3 (11" x
17") FULL-BLEED function is used, the full image of an A3 (11" x 17") size original will
be copied onto A3W (12" x 18") size copy paper.
The A3 (11" x 17") FULL-BLEED function can only be used when the original is placed
on the document glass. (The DADF cannot be used.)
Reduction or enlargement cannot be selected with this function. If reduction or
enlargement has been selected, the copy ratio will be reset to 100% when this function
is selected.
Automatic two-sided copying is not possible.
Original (A3 (11" x 17")) size
When the BORDER LINE checkbox is selected, border-
lines are added around the borders of the images.
Xerox WorkCentre C226 User Guide
Copy (A3W (12" x 18")) size