Setting for F-Code Confidential Transmission Memory Boxes
(Print PIN)
NOTES:
Xerox WorkCentre C226 User Guide
4. Touch the [OK] key.
You will return to the screen of step 2 and the selected polling times will appear.
5. To exit, touch the [EXIT] key.
To program another memory box, touch the [NEXT] key.
Next
Exit
Program the print PIN (Personal Identification Number) that is used to print a docu-
ment that has been received to an F-code confidential memory box. For information on
using a print PIN, refer to"Printing a Document Received to an F-Code Confidential
Memory Box" on page 5-57.
•
Program a 4-digit number for the print PIN. The characters "" and "#" cannot be
used.
•
The print PIN can not be omitted.
•
Take care not to forget the print PIN that you have programmed. If you forget the
passcode, consult your dealer.
1. Touch the [CONFIDENTIAL] key in step 3 of "Programming an F-Code Memory
Box" on page 5-82 and store a box name, sub-address, and passcode.
2. Touch the [PRINT PIN] key.
Fax Information
Box Name
Sub Address
55112233/481221
Print Pin
Programming, Editing, and Deleting F-Code Memory Boxes
Touching the [EXIT] key returns you to the screen of
step 3 on page 5-82.
Touching the [NEXT] key returns you to the screen for
programming a new memory box (the screen of step 4
on page 5-82).
5-85