Watermark Settings - Xerox WorkCentre C226 User Manual

Watermark settings

NOTE:
Xerox WorkCentre C226 User Guide
The following screen appears when the Watermarks tab is selected. The settings and
buttons in this screen are explained below.
Watermark preview
The watermark function is used to print a watermark (a faint, shadowlike text
image) on the paper. This shows a preview of the currently selected watermark.
The position of the watermark can be adjusted by directly dragging the image with
your mouse, or by using the scrollbars at the right and bottom of the preview
screen.
Default setting: x: 0, y: 0
The image that appears in the Watermark Preview is an approximate representation of
what will appear in the print.
[Center]
Select this setting to have the watermark printed in the centre of the paper.
Watermark
Select a watermark from the watermarks that appear in the box.
Default setting: None
[Add]
Click this button to create a custom watermark.
[Update]
Click this button to adjust the size or angle of the text of a stored watermark.
[Delete]
Click this button to delete a stored watermark.
Selecting Printing Functions
3-33