Storing A Group Index - Xerox WorkCentre C226 User Manual

Network Scanner Operation

Storing a Group Index

4-54
4. Edit or delete the sender.
E-Mail Sender
Sender Name ÄÞ·-ÒÝÄ'æ1 1 Group
RE.Address ppd1@abcd.com
Edit sender information in the same way that you stored it. When finished, touch
the [EXIT] key to return to the screen of step 3.
To delete the sender, touch the [DELETE] key. A message appears asking you to
confirm your selection. Touch the [YES] key to delete the sender and return to the
screen of step 3.
You can assign any name up to 6 characters long to each of the USER indexes
([USER 1] to [USER 6]).
To perform this procedure from the Web page, refer to page 4-17.
1. Press the [CUSTOM SETTINGS] key, and then touch the [ADDRESS CONTROL]
key (refer to steps 1 and 2 on page 4-42).
2. Touch the [CUSTOM INDEX] key.
Direct Address
Custom Index
E-Mail Sender
3. Touch an index key ([USER 1] to [USER 6]).
You can enter a name for the selected index.
Custom Settings
Custom Index
Select The Key To Be Custom Named.
User 1 User 2 User 3
When touched, the letter entry screen appears.
Delete Exit
OK
User 4 User 5 User 6
Xerox WorkCentre C226 User Guide