Installing The Wago Target System For Codesys; Fig. 7: Users And Passwords Of The 750-849 Controller's Web Server; Fig. 8: Installation Of Wago Target System For Codesys 1/2; Fig. 9: Installation Of Wago Target System For Codesys 2/2 - WAGO 750-872 Quick Start Manual

14 • Quick-Start Guide

Installing the WAGO Target System for CoDeSys

The configuration sites linked via Hyperlinks require a login. In the default
state the following users are defined:

Fig. 7: Users and passwords of the 750-849 controller's web server

2.3 Installing the WAGO Target System for CoDeSys
The following installation is only to be carried out when a CoDeSys version
below 2.3.9.7 is used. From CoDeSys Version 2.3.9.7, the WAGO target
system is already included in the installation.
To install the WAGO target system, the installation file (Customer.exe) must
first be downloaded and saved in any folder. The installation program must
then be run by double-clicking on Customer.exe.
The installation will start and the following two windows will be seen one
after the other; when neither of the two windows is displayed, the installation
is complete.

Fig. 8: Installation of WAGO target system for CoDeSys 1/2

Fig. 9: Installation of WAGO target system for CoDeSys 2/2

User Password
admin wago
user user
guest guest
WAGO-I/O-SYSTEM 750
Telecontrol Quick-Start Manual