1
Introduction
When the front panel identification indicator is turned on, a blinking
"IDENTIFY" message is displayed on the front panel screen as shown in
the following figure. The "IDENTIFY" message will blink to identify the
N432A until you click Turn Off Front Panel Identification Indicator.
Figure 1-6 Blinking message to identify the N432A
When the N432A is configured to LAN, the Lan Status on the Remote
Interfaces screen will display the LAN error condition and status of the
LAN configuration connection. There are six types of Lan Status messages
that may occur, as listed in
Figure 1-7 Example of the Lan Status message
20
The "IDENTIFY" message will
blink when the front panel
identification indicator is
turned on.
Table 1-
1.
N432A User's Guide