800, Operation Complete Event; 700, Request Control Event; 600, User Request Event; 500, Power On Event - Keysight Technologies Option 503 Service Manual

Instrument Messages
Event Messages

–800, Operation Complete Event

Err# Message
–800
Operation complete

–700, Request Control Event

Err# Message
–700
Request control

–600, User Request Event

Err# Message
–600
User request

–500, Power on Event

Err# Message
–500
Power on
–400 to –499, Query Errors
Err# Message
–400
Query Error
–410
Query INTERRUPTED
–420
Query UNTERMINATED
–430
Query DEADLOCKED
N9030A PXA Signal Analyzer Service Guide
Verbose/Correction Information
The instrument has completed all selected pending operations in
accordance with the IEEE 488.2, 12.5.2 synchronization protocol.
Verbose/Correction Information
The instrument requested to become the active IEEE 4881
controller-in-charge.
Verbose/Correction Information
The instrument has detected the activation of a user request local
control.
Verbose/Correction Information
The instrument has detected an off to on transition in its power
supply.
Verbose/Correction Information
There was a problem with a query command. The exact problem
cannot be specifically identified.
Some condition caused an INTERRUPTED query to occur. For
example, a query was followed by DAB or GET before a response
was completely sent.
Some condition caused an UNTERMINATED query to occur. For
example, the device was addressed to talk and an incomplete
program message was received.
Some condition caused a DEADLOCKED query to occur. For
example, both the input buffer and the output buffer are full and
the analyzer cannot continue. The analyzer automatically discards
output to correct the deadlock.
95