Chrysler RAM TRUCK 2500 1994 Service Manual page 56

•
LUBRICATION AND MAINTENANCE 0 - 31
LUBRICANT SPECIFICATIONS
All applicable exterior and interior vehicle operat­
ing mechanisms should be:
• Inspected
• Cleaned
• A l l the pivoting/sliding contact areas on the mech­
anisms should then be lubricated.
Mopar Multi-Mileage Lubricant or an equivalent,
should be used to lubricate the mechanisms. The
door weatherstrip seals should be lubricated with sil­
icone lubricant spray (Fig. 5).
COMPONENT
S I K V I C I
INTEiVM
L U B R I C A N T
Door Hinges As Required Engine Oil
Door Latches
As Required Multi-Purpose Grease
NLGI
GC-LB
(Water Resistant) (1)
Hood Latch Release Mechanism & Safety Latch As Required
(When Performing
Other Underhood
Services)
Multi-Purpose Grease NLGI GC-LB 2 EP (2)
Hood Hinges As Required Engine Oil
Seat Regulator & Track Release Mechanism As Required
Multi-Purpose Grease NLGI GC-LB 2 IP (2)
Tailgate Hinge
As Required Multi-Purpose Grease NLGI GC-LB 2 EP (2)
Tailgate Support Arms As Required Engine Oil
Tailgate Latches As Required
White Spray Lubricant (3)
Tailgate Release Handle (Pivot & Slide Contact Surfaces) As Required Multi-Purpose Grease NLGI GC-LB 2 EP (2)
Window System Components (Regulators, Tracks, Rods
& Channel Areas — Except Glass Run Weatherstrips
and Felt Lubricator, if Equipped)
As Required White Spray Lubricant (3)
Lock Cylinders Twice/Year Lock Cylinder Lubricant (4)
Parking Brake Mechanism
As Required Multi-Purpose Grease NLGI GC-LB (1)
1. Mopar Wheel Bearing Grease (High Temperature)
2. Mopar Multi-Mileage Lubricant
3. Mopar Spray White Lube
4. Mopar Lock Cylinder Lubricant
J9200-58
Fig. 5 Body Lubrication Specifications