8F - 14
AUDIO SYSTEMS
•
Fig. 16 B Pillar Interior Trim
(c) Loosen rear screws of cowl/sill trim.
(d) Slide B pillar t r i m out from under cowl/sill
trim.
(4) Move t r i m panel far enough to access speaker
screws.
(5) Remove screws holding speaker.
(6) Pull speaker out and unplug wiring.
(7) Reverse removal procedures to install speaker.
RELAY/CHOKE—INFINITY SPEAKERS
I f the audio system is lacking bass, check for con
tinuity across the relay and choke connectors. I f no
continuity, replace relay/choke assembly.
The relay/choke is located behind the instrument
panel, to the right of the RWAL module, i f equipped
(Fig. 17).
Fig. 17 Relay/Choke
Assembly
(1) Remove knee blocker (Fig. 18).
Fig. 18 Knee Blocker
Removal
(2) Remove 2 screws holding bottom of RWAL mod
ule bracket to instrument panel brace (Fig. 19).
(3) Remove screw holding top of RWAL module
bracket to instrument panel (Fig. 20) and remove
module.
(4) Remove relay from connector or remove 2
screws and relay/choke assembly (Fig. 17).
(5) Reverse removal procedures to install.