Chrysler RAM TRUCK 2500 1994 Service Manual page 173

5 - 14 MASTER CYLINDER •
(3) Start all brakeline fittings i n cylinder and
valves by hand (Fig. 17). Tighten fittings about 3-4
threads to secure each line i n place.
(4) Install rear brake antilock valve i n combination
valve bracket (Fig. 17). Be sure bracket tab is seated
in valve before installing valve attaching bolt. Then
install and tighten valve bolt to 17 N-m (13 ft. lbs.)
torque.
(5) Tighten valve and cylinder brakeline fittings to
16-23 N-m (140-200 i n . lbs.) torque.
(6) Install master cylinder attaching nuts on
booster studs. Tighten nuts to 23-34 N-m (200-300 in.
lbs.) torque.
(7) Fill and bleed brake system. Refer to bleeding
procedure i n appropriate antilock brake section.
MASTER
ABS VALVE SECONDARY UNE J9405-72
Fig. 17 Master Cylinder And Valve Brakeline
Connections