Chrysler RAM TRUCK 2500 1994 Service Manual page 427

8E - 30 INSTRUMENT PANEL AND GAUGES
•
KEY-IN SWITCH &
H A L O LIGHT
MULTI-FUNCTION
SWITCH
I G N I T I O N
SWITCH
TURN S I G N A L
SWITCH & LEVER
SPEED
CONTROL
J918J-2
Fig. 20 Steering Column Connectors
TOE PLATE
M O U N T I N G NUTS (3)
Fig. 21 Steering Column Toe Plate
J948E-3
/ #
J948E-5 ,
Fig. 22 Steering Column Mounting
(16) Allow column to lower and rest on seat.
(17) Remove 2 screws from bottom of airbag con­
trol module (ACM) cover (Fig. 23).
(18) Remove 4 screws holding ACM to transmis­
sion tunnel (Fig. 24).
.INSTRUMENT
PANEL TRANSMISSION
TUNNEL - J94SM-1
Fig. 23 Airbag Control Module Cover Screws
AIRBAG
CONTROL
MODULE
J948M-2
Fig. 24 Airbag Control Module (ACM)
(19) Disconnect wiring at ACM.
(20) Disconnect left side wiring.
(21) Remove 2 screws holding brake release to bot­
tom of instrument panel.
(22) Disconnect right side wiring. There are:
• 2 connectors attached to the heater A/C housing.
• courtesy lamp connector
• antenna cable
• 2 body connectors
(23) Remove 5 screws holding instrument panel to
dash.
(24) Loosen lower instrument panel pivot bolts.
(25) Roll instrument panel down.
(26) Disconnect vacuum harness for heater A/C
system.
(27) Using a screwdriver or pointed tool, push
through plastic flashing to release locking tab on
heater-A/C control cable (Fig. 25).
(28) Pull cable from top of heater core housing.
(29) Remove instrument panel from vehicle.