Chrysler RAM TRUCK 2500 1994 Service Manual page 139

3 - 32 REAR SUSPENSION AND AILE
CASE RING GEAR
J9202-76
EXCIIOR
RING
8903-33
Fig. 14 Exciter Ring Removal
(13) Rotate the differential side gears and remove
the pinion mate gears and thrust washers (Fig. 18 ).
(14) Remove the differential side gears and thrust
washers.
PINION REMOVAL/DISASSEMBLY
REMOVAL/DISASSEMBLY
(1) Remove the pinion yoke nut and washer. Use
Remover C-452 and Wrench C-3281 to remove pinion
yoke (Fig. 19).
(2) Remove pinion, and remove pinion seal with
Remover 7794A and slide hammer (Fig. 20).
(3) Remove oil slinger or collapsible spacer, front
bearing and shims. Record the thickness of the shims
(Fig. 21).
(4) Remove front pinion bearing cup with;
• Model 60 and 70: Remover D-158 and Handle
C-4171
• Model 80: Remover C-4307 and Handle C-4171
SPECIAL TOOL
1130
SPECIAL TOOL
938
BUTTON
DIFFERENTIAL
BEARING
J9403-48
Fig. 15 Differential Bearing Removal
DRIFT
J9302-33
Fig. 16 Mate Shaft Lock Pin Removal
(5) Remove rear bearing cup with;
• Model 60 and 70: Remover D-162 and Handle
C-4171
• Model 80: Remover D-159 and Handle C-4171
(6) Remove depth shims from the housing bore i f
used. Record the thickness of the depth shims.
(7) Remove the pinion rear bearing and selective
pinion position shim (Fig. 22).