Chrysler RAM TRUCK 2500 1994 Service Manual page 487

8L - 4 LAMPS
LAMP BULB 5ERW1CE
INDEX
page
Cargo Lamp Bulb 1
Center High Mounted Stop Lamp (Chmsl) 1
Front Side Marker Lamp Bulb 1
Headlamp Bulb 1
License Plate Lamp Bulb 2
Park and Turn Signal Lamp Bulb . . . . . . . . . . . . . . . 1
page
Roof Clearance Lamp Bulb 2
Tail, Stop, Turn Signal and Back-Up Lamp
Bulb—Chassis Cab 2
Tail, Stop, Turn Signal and Back-Up Lamp
Bulb—Pickup 2
HEADLAMP BULB
On driver side and on vehicles with dual batteries,
the headlamp assemble must be removed to service
the headlamp bulb.
REMOVAL (FIG. 1)
(1) Release hood latch and open hood.
(2) Remove headlamp assembly on drivers side or
passenger side when equipped with dual batteries.
Refer to Headlamp Removal paragraph of Exterior
Lamps section.
(3) Disengage wire connector from headlamp bulb.
(4) Remove retaining ring holding bulb to head­
lamp.
(5) Pull bulb from headlamp.
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs
with fingers or other possibly oily surface, reduced
bulb life will result.
Reverse the preceding operation.
BULB
SOCKET
BULB
RETAINING
RING
ELECTRICAL
CONNECTOR
LENS/
REFLECTOR
PLASTIC
BASE
UNLOCK
918L-34
Fig. 1 Headlamp Bulb
FRONT SIDE MARKER LAMP BULB
REMOVAL
(1) Remove park and turn signal lamp.
(2) Remove side marker lamp socket from back of
lamp.
(3) Pull side marker lamp bulb from socket.
INSTALLATION
Reverse the preceding operation.
PARK AND TURN SIGNAL LAMP BULB
REMOVAL
(1) Remove park and turn signal lamp.
(2) Remove park and turn Signal lamp socket from
back of lamp.
(3) Pull park and turn signal lamp bulb from
socket.
INSTALLATION
Reverse the preceding operation.
CENTER HIGH MOUNTED STOP LAMP (CHMSL)
REMOVAL (FIG. 2 |
(1) Remove screws holding CHMSL to roof panel.
(2) Separate CHMSL from roof.
(3) Remove socket from lamp.
(4) Pull bulb from socket.
INSTALLATION
Reverse the preceding operation.
CARGO LAMP BULB
REMOVAL (FIG. 2 )
(1) Remove screws holding cargo lamp to roof
panel.
(2) Separate cargo lamp from roof.
(3) Remove socket from lamp.
(4) Pull bulb from socket.
INSTALLATION
Reverse the preceding operation.
ROOF CLEARANCE LAMP BULB
REMOVAL
(1) Remove roof clearance lamp lens.
(2) Pull bulb from lamp.
INSTALLATION
Reverse the preceding operation.