•
BUMPERS AND FRAME
13 - 3
SPARE TIRE WINCH
REMOVAL (FIG. 6)
(1) Remove spare tire from under vehicle.
(2) Remove bolts holding spare tire winch to spare
tire bracket.
(3) Separate spare tire winch from vehicle.
INSTALLATION
Reverse the preceding operation.
REAR BUMPER
REMOWAL
(FIG.
7)
(1) Support rear bumper on a suitable lifting de
vice.
(2) Remove bolts holding rear bumper braces to
frame rails.
(3) Disengage license plate lamp wire connector
from body wire harness, i f equipped.
(4) Separate rear bumper from vehicle.
INSTALLATION
Reverse the preceding operation.
Fig. 6 Spare Tire Winch
J9413-8
Fig. 7 Rear
Bumper