Chrysler RAM TRUCK 2500 1994 Service Manual page 914

•
BUMPERS AND FRAME 13 - 1
BUMPERS AND FRAME
C O N T E N T S
page page
BUMPERS AND FRAME COMPONENTS 1 SNOW PLOW 5
FRAME 23
B U M P E R S AND FRAME COMPONENTS
INDEX
page
Front Bumper 1
Front Bumper Air D a m 2
Front Bumper Lower F a s c i a 1
Front Bumper Upper F a s c i a 1
page
R e a r B u m p e r 3
Skid Plate
2
S p a r e Tire Winch 3
Trailer Hitch
4
FRONT BUMPER
REMOWAL (FIG. 1)
(1) Support front bumper on a suitable lifting de­
vice.
(2) Remove bolt holding front bumper brace to
frame rail.
(3) Remove nuts and stud plates holding front
bumper to end of frame rail.
(4) Disengage wire connectors from horns.
(5) Separate front bumper from vehicle.
INSTALLATION
Reverse the preceding operation.
FRONT BUMPER UPPER FASCIA
REMOWAL (FIG. 2)
(1) Remove bumper.
(2) Disengage clips holding upper fascia to bumper
face bar.
(3) Separate fascia from bumper.
INSTALLATION
Reverse the preceding operation.
FRONT BUMPER LOWER FASCIA
REMOWAL (FIG. 3)
(1) Remove bumper.
(2) Disengage clips holding end of upper fascia to
bumper face bar.
Fig. 1 Front Bumper
(3) Disengage clips holding lower fascia to bumper
face bar.
(4) Separate lower fascia from bumper.
INSTALLATION
Reverse the preceding operation.