Chrysler RAM TRUCK 2500 1994 Service Manual page 203

S - 44 ALL-WHEEL ANTILOCK BRAKE SYSTEM (ABS) •
REAR
BRAKE
HOSE
REAR
SENSOR
HARNESS
CONNECTOR
REAR
SENSOR
REAR
AXLE
HOUSING
J9405-81
Fig. 20 Rear Speed Sensor Harness Routing And Attachment
(2) Position cover over sensor and install cover and
sensor attaching screw.
(3) Connect harness wires to sensor.
(4) Lower vehicle.
REAR SPEED SENSOR HARNESS REMOVAL
(1) Raise vehicle on hoist.
(2) Disconnect sensor harness at sensor. Then dis­
engage small harness clip from sensor cover (Fig. 21).
(3) Disconnect sensor harness at axle connector.
(4) Unclip sensor harness from plastic retainer
that secures harness and rear brake hose (Fig. 22).
(5) Remove rear harness from vehicle.
REAR SPEED SENSOR HARNESS INSTALLATION
(5) I f sensor rear harness must also be removed, is
also
HARNESS
CUP
SENSOR
HARNESS
CONNECTOR
J9405-92
Fig. 21 Disengaging Harness Connector At Rear
Sensor
SENSOR
HARNESS
HOSE
U-CUP
J9405-93
Fig. 22 Sensor Rear Harness Attachment