13 - 2
BUMPERS AND FRAME
•
RETAINING
UPPER
LOWER
RETAINING
FASCIA
CLIP
J9413-3
Fig. 2 Front Bumper Upper
Fascia
J9413-2
Fig. 3 Front Bumper Lower
Fascia
FRONT BUMPER AIR DAM
REMOVAL (FIG. 4)
(1) Remove Pin-type fasteners holding air dam to
bottom of front bumper.
(2) Remove screws holding air dam to bottom of
front bumper.
(3) Separate air dam from vehicle.
BUMPER
AIR DAM
SCREW
J9413-4
Fig. 4 Front Bumper Air Dam
SKID PLATE
REMOVAL (FIG*
5)
(1) Hoist and support vehicle on safety stands.
(2) Remove bolts holding skid plate to frame rails.
(3) Separate skid plate from vehicle.
INSTALLATION
Reverse the preceding operation.
Fig. 5 Skid Plate
INSTALLATION
Reverse the preceding operation.