•
Fig. 7 Power Mirror Switch
Connector
(4) Install power switch control knob by pushing
onto control stem.
(5) Place front of door switch panel into opening.
Press rear of switch panel into place.
(6) Install door pull cup.
(7) Install door panel attaching screws.
MIRROR ASSEMBLY REPLACEMENT
(1) Remove door trim panel as described i n Mirror
Switch Replacement.
POWER MIRRORS
8T - S
Fig. 8 Power Mirror
Removal/Installation
(2) Unplug mirror motor connector (Fig. 8).
(3) Remove 3 nuts holding mirror to door.
(4) For installation, reverse removal procedure.