Chrysler RAM TRUCK 2500 1994 Service Manual page 3

F O R E W O R D
The information contained i n this service manual has been prepared for the professional automotive tech­
nician involved i n daily repair operations. This manual does not cover theory of operation, which is addressed
i n service training material. Information describing the operation and use of standard and optional equipment
is included i n the Owner's Manual provided with the vehicle.
Information i n this manual is divided into groups. These groups contain general information, diagnosis,
testing, adjustments, removal, installation, disassembly, and assembly procedures for the components. To as­
sist i n locating a group title page, use the Group Tab Locator on the following page. The solid bar after the
group title is aligned to a solid tab on the first page of each group. The first page of the group has a contents
section that lists major topics within the group. I f you are not sure which Group contains the information you
need, look up the Component/System i n the alphabetical index located i n the rear of this manual.
A Service Manual Comment form is included at the rear of this manual. Use the form to provide Chrysler
Corporation with your comments and suggestions.
Tightening torques are provided as a specific value throughout this manual. This value represents the
midpoint of the acceptable engineering torque range for a given fastener application. These torque values are
intended for use i n service assembly and installation procedures using the correct OEM fasteners. When re­
placing fasteners, always use the same type (part number) fastener as removed.
Chrysler Corporation reserves the right to change testing procedures, specifications, diagnosis, repair
methods, or vehicle wiring at any time without prior notice or incurring obligation.
NOTE: The acronyms, terminology and nomenclature used to identify emissions related components i n
this manual may have changed from prior publications. These new terms are i n compliance with S.A.E.
recommended practice J1930.