8K - 12
WINDSHIELD WIPER AND WASHER SYSTEMS
TYPICAL
HOSE
CLAMP
NUMBER/LETTER
LOCATION
J9407-39
Fig. 2 Clamp Number/Letter
Location
Fig. 3 Upper Radiator Hose
Removal
(6) Remove rubber grommet from reservoir and
throw away.
WASHER PUMP
J948K-18
Fig. 4 Washer Fluid Reservoir
Removal
INSTALLATION
(1) Install new rubber grommet into place on res
ervoir.
(2) Position pump/sensor into place and push i n
firmly until i t locks into grommet.
(3) Connect electrical lead and hose to pump/sen
sor.
(4) Install reservoir onto radiator fan shroud.
(5) Fill reservoir with water and/or washer
fluid,
inspect for leaks and test system.
(6) Install radiator hose.
(7) Fill cooling system. Refer to Group 7 - Refilling
Cooling System.
WASHER NOZZLES
(1) To replace a washer nozzle, gently pry nozzle
out of cowl grille.
(2) Remove hose from nozzle.
(3) Attach hose to new nozzle.
(4) Push nozzle into grille.