Chrysler RAM TRUCK 2500 1994 Service Manual page 501

8M - 8 RESTRAINT SYSTEMS
Fig. 9 Battery Heatshield
Fig. 10 Forward Battery Tray Nuts—Viewed From
Under Vehicle
(6) Remove 2 nuts and 2 bolts holding battery tray
to vehicle (Fig. 11).
(7) Lift battery tray up far enough for access to
speed control servo electrical connector (Fig. 12).
(8) Unplug electrical connector from speed control
servo.
(9) Move battery tray enough to access impact sen­
sor.
Fig. 12 Speed Control Servo Mounting
(10) Remove 3 screws holding sensor to front
wheelhouse extension. Remove sensor (Fig. 7).
Do not remove tape holding harness to con­
nector.
(11) Unplug connector from sensor and remove
sensor (Fig. 6).
INSTALLATION
(1) Connect sensor wiring lead from harness to
connector on body of sensor.