8E - 24
INSTRUMENT PANEL AND GAUGES
•
SPEEDOMETER
P I N I O N G E A R
Fig. 16 PRND21 Housing
Removal
LAMP BULB REPLACEMENT—INSTRUMENT
CLUSTER
REMOWAL
(1) Disconnect negative cable from battery.
Fig. 17 PRND21 Indicator
Adjustment
(2) Remove instrument cluster. See cluster re
moval.
(3) Twist lamp socket assembly and remove from
printed circuit board.
(4) Remove bulb from socket.
INSTALLATION
(1) Install bulb into socket.
(2) Install socket assembly into printed circuit
board.
(3) Position cluster into place i n panel. See cluster
installation.
(4) Connect negative cable to battery.
LAMP BULB REPLACEMENT—MESSAGE CENTER
The message center is located i n the lower portion
of the heater control. Refer to Heater/ A/C Control
Removal i n this section.
(3) Twist lamp socket assembly and remove from
printed circuit board.
(4) Remove bulb from socket.
(5) To install message refer to Heater A/C Control
Installation