Chrysler RAM TRUCK 2500 1994 Service Manual page 442

•
REMOVE 2 SCREWS
J948S-2
Fig. 10 Door Pull Cup
Fig. 11 Switch Bezel Rear Retaining Tab
Fig. 12 Door Switch Connectors
To aid in removal of the trim panel, start at
the bottom of the panel.
(7) Using a device such as a trim stick, pry trim
panel away from door around perimeter and remove
trim panel.
(8) Remove screws holding speaker (Fig. 15).
(9) Disconnect speaker leads.
(10) Remove speaker.
INSTALLATION
(1) Connect leads to speaker.
(2) Position speaker into place, install mounting
screws and tighten securely.
AUDIO SYSTEMS 8F - 13
Fig. 14 Power Mirror Switch Retaining Nut
(3) Install door trim panel by starting with re­
tainer closest to the outside mirror. Press retainers
in working around door toward lock button. On high-
line door panel, continue with fasteners along belt
line.
REAR SPEAKERS
(1) Remove rear screw from sill trim.
(2) Remove 2 screws holding B pillar trim (Fig.
16).
(3) Remove B pillar t r i m by:
(a) gently unhooking top 2 retainer clips by pull­
ing inward and forward.
(b) Remove 2 plastic push-in fasteners from bot­
tom of panel.