•
AUDIO SYSTEMS
8F - 11
S E R V I C E P R O C E D U R E S
RADIO REPLACEMENT
REMOVAL
(1) Disconnect negative cable from battery.
(2) Remove 2 screws from cup holder (Fig. 1) and
remove assembly.
J948E-8
Fig. 1 Cup Holder Removal
(3) Remove 2 screws from ash receiver (Fig. 2) and
remove assembly.
v.
J
J948I-9
Fig. 2 Ash Receiver
Removal
(4) Carefully pry bezel away from instrument
panel to disengage clips (Fig. 3).
J948E-46
Fig. 3 Instrument Bezel
Removal/Installation
(5) Unplug connector from cigar lighter (Fig. 4).
ELECTRICAL
CONNECTOR
CLIPS
J948E-10
Fig. 4 Cigar Lighter
Removal
(6) Unplug connector from auxiliary power outlet.
(7) Remove 2 mounting screws from front of radio
(Fig.
5).
J948FS
Fig. 5 Radio to Instrument Panel Mounting
(8) Pull radio out of instrument panel and discon
nect wiring and antenna (Fig. 6).
(9) Remove screw from ground strap (Fig. 6).
INSTALLATION
(1) Install ground strap.
(2) Install wiring and antenna.
(3) Insert radio into panel and install mounting
screws.
(4) Connect auxiliary power outlet and cigarette
lighter.
(5) Install instrument cluster bezel.
(6) Install cup holder assembly.
(7) Install ash receiver assembly.
(8) Connect negative cable to battery.
ANTENNA REPLACEMENT
(1) Disconnect negative cable from battery.