•
ASSEMBLY
LEVER
J9405-3
Fig. 4 Self Adjuster
Component Installation (11 Inch
Brake)
essary to disassemble adjuster lever components un
less they are worn, or damaged.
(9) Disconnect parking brake cable from lever at
tached to secondary brakeshoe (Fig. 8). Then remove
brakeshoe.
(10) I f brakeshoes are to be replaced, remove E-clip
attaching parking brake lever to secondary brake-
shoe and remove lever (Fig. 8).
(11) Inspect wheel cylinder. I f leakage is evident,
remove and overhaul cylinder. Refer to overhaul pro
cedure i n this section.
BRAKESHOE INSTALLATION (13-INCH BRAKE)
(1) Clean support plate with Mopar brake cleaner.
Then smooth shoe contact pads with wire brush or
emery cloth.
DRUM BRAKES
5 - 63
PRIMARY
ADJUSTER LEVER
SHOE
SPRING
RETURN
(INSTALL FIRST)
Fig. 5 Checking
Return/Adjuster
Spring
Installation
Fig. 6 Return Spring
Removal/Installation
PRIMARY
SHOE
J9405-18
Fig. 7 Holddown Spring, Pin And Retainer
Removal/
Installation