Rear Flat Belt Terminal Cover Removal; Figure 137: Upper Arm Grip Removal - Precor AMT Series Service Manual

Figure 137: Upper Arm Grip Removal

6 Repeat the process for the remaining upper arm grip.

Rear Flat Belt Terminal Cover Removal

7 Remove the two #10-24 X 1.25 screws that secure the flat belt
terminal covers to the flat belt terminal, remove the outside
terminal cover.
8 Rotate the top of the inside terminal cover down until it is below
the stairarm pedal, pull to remove.
9 Repeat the process for the remaining rear flat belt terminal cover.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 212