Possible Causes; Possible Remedies; Unit Reboots Of Its Own Volition; Description - Precor AMT Series Service Manual

Possible Causes

1 The Stop Switch lanyard has been pulled and the reset latch has been
disengaged.
2 The stop switch reset latch has been engaged, but not fully so.
3 The cable connecting the stop switch to the console is disconnected,
loose, or damaged.
4 The stop switch is malfunctioning

Possible Remedies

5
Press down firmly the yellow button on the dash.
reset itself shortly.
6
Pull the lanyard to disengage the reset latch.
the yellow button on the dash to reset the treadmill.
7
Inspect the connections leading from the stop switch to the console.
Ensure that the cables are secure and undamaged.
8
Replace the stop switch assembly.

Unit reboots of its own volition

Description

Console fully reboots without any outside input, either during the boot
process or while in operation.
Possible Causes
1
Power connections outside fitness equipment are loose or bad
2
Power connections inside fitness equipment are loose or bad
3
Faulty power supply
4
Facility power is not configured correctly.
5
Faulty console
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
The yellow button will be raised on the dash.
The tread will
P ress down firml
y on
Page 123