Figure 6: Maintenance Access Hook - Precor AMT Series Service Manual

Figure 6: Maintenance Access Hook

7 Remove the Heart Rate PCA. See
8 Disconnect the Heart Rate Cable from the Heart Rate PCA.
9 Disconnect the Data cable, Auto Stop cable (Treadmill only), Stop
Key cable (Treadmill only), Ground wire and the CSAFE cable (if in
use) from the Upper PCA.
access hook and place it on a flat work surface.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Replacing the P30 HR PCA
Remove the console from the maintenance
(on page 37).
Page 30