Console Hook And Notch; Figure 39: Disconnecting Cables - Precor AMT Series Service Manual

Figure 39: Disconnecting Cables

3 Remove the console by lifting it off the mounting hook.

Console Hook and Notch

1 Install the replacement console. In the back of the P80 console
there is a large black steel support called the Armor.
bottom of Armor there is a notch about ¼ inches in depth and about
1½ inches across.
hook.
Note: Before releasing the console insure the notch is securely seated
over the mounting hook.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Set the console notch over the over the mounting
At the
Page 98