Stairarm Replacement Procedure; Rear Flat Belt Terminal Cover Removal; Figure 111: Stairarm And Front Arm - Precor AMT Series Service Manual

Figure 111: Stairarm and Front Arm

Stairarm Replacement Procedure

Rear Flat Belt Terminal Cover Removal

1 Remove the two #10-24 X 1.25 screws that secure the flat belt
terminal covers to the flat belt terminal, remove the outside
terminal cover.
2 Rotate the top of the inside terminal cover down until it is below
the stairarm pedal, pull to remove.
3 Repeat the process for the remaining rear flat belt terminal cover.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 189