Possible Remedies; Poor Quality Video - One Channel Or Limited Channels - Precor AMT Series Service Manual

Possible Remedies

1 Verify condition and connections of video distribution network.
Begin as close to head end as possible and check for visible damage
to coaxial cables or connectors.
2 Check signal quality and strength as close to head end as possible.
If poor from the head end have customer contact their A/V service
company to ensure signal from head end is within acceptable
parameters.
3 Troubleshoot as above.
Satellite Company, etc.) will need to address this issue.
4 Enter the Settings Menu.
Verify that unit is set for United States.. See
page 81).

Poor Quality Video - One Channel or Limited Channels

Description
One or a limited number channels on a unit has poor reception or no
reception.
Possible Causes
1 Loose or damaged coaxial cable.
2 Poor television signal to the machine.
3 Incorrect channel scan lineup.
Possible Remedies
4 Check for good video signal to the tuner.
5 Inspect jumper cable connecting fitness equipment to the video drop.
If it is visibly damaged or disconnected, replace or reconnect.
it passes visual inspection, swap with a known good jumper cable.
If the TV channel now appears, the cable is the cause.
jumper cable.
check on the F connectors.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Signal provider (e.g. Cable Company,
Select System Settings, then TV Settings.
If the channel does not appear, perform the same
Verify all connections are tight.
P80 TV Settings
(on
If
Replace the
Page 112