Precor AMT Series Service Manual page 25

Use the , keys to move
to move to USAGELOG.
Press the OK key.
Usage log
Use the , keys to move
through the list of programs
Press the CLEAR key to
exit the USAGELOG
display.
Use the , keys to move
to move to ERROR LOG.
Press the OK key.
Press the OK key.
Use the , keys to move
through the list of errors.
Error Log
If you wish to clear the error
log, press and hold the
QUICK START key.
Press the CLEAR key to
exit the ERROR LOG
display.
Press the PAUSE key to
exit the DIAGS-
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
A message will scroll describing the program, the
number of times and the number of minutes the
program was used.
The quantity of errors in the log will be displayed.
The most recent error will be displayed first.
The error messages will list the error name, the
odometer reading when the error occurred and the
hour meter when the error occurred.
The message HOLD TO CLEAR ERRORS will be
displayed. The error log will be cleared when the
message NO ERRORS is displayed.
Please note that the ERROR
LOG may also be accessed at
any time by pressing and
holding the CLEAR key for
four seconds. If the error log
does not contain any errors,
the message STUCK KEY will
be displayed.
Page 23